Roadhawk HD-2
CM-G700
2K Super HD Automobile Dash Cam Video Recorder
$329
 
OVERVIEW
SPECIFICATION
VIDEO
ACCESSORIES
SUPPORT
 

Roadhawk 2K Super HD Car Vehicle Dash Cam DVR Video Recorder GPS G Sensor Blackbox


The RoadHawk HD-2 represents the pinnacle of current dash cam technology and is RoadHawk’s most advanced camera to date. Roadhawk HD-2 is  fitted with full EIS (electronic image stabilisation) to give you the smoothest video even on the roughest of road surfaces.The HD-2 sensor used in the Roadhawk HD-2 not only gives amazingly sharp and colourful daytime images but also outperforms any other in car camera currently available in low light conditions. The RoadHawk HD-2 uses the best components available to provide drivers with crisp, SuperHD footage and unrivalled low-light / night vision, ensuring that you are completely protected in all conditions.

Features:

•    Super HD 2304x1296p at 30fps, 1080p & 720p at up to 60fps video recording
•    HDR sensor providing excellent video quality in all lighting conditions
•    SD XC compatible (4GB to 512GB)
•    External GPS antenna connection
•    External Audio input connection
•    10hz GPS Receiver
•    A7L processor for high quality H.264 encoding
•    User controlled video bit rate setting
•    User controlled G-Force, audio input and speaker volume settings
•    Audio can be disabled
•    3x adhesive mounts ensuring optimum fit for all vehicles
•    1/4” standard camera mount thread for use with numerous camera mounts and grips
•    Low level algorithm for detecting SD card errors and warning the user of any potential problems
•    Alarm input connection for remote triggering events and output for communicating with tracking devices

•    Chipset : Ambarella A7/LA70 chip, support 1296p / 30fps, 1080p / 60fps, HDR 1080p / 30fps, 720p / 60fps and 720p / 30fps
•    Audio: Variable sensitivity internal mic - External mic input (3.5mm jack)
•    Encoding: H.264 . MP4 Files with embedded G-Force and GPS data
•    Bitrate: Adjustable from 4Mbits to 20Mbits
•    Loop Mode: One minute or five minute files continuous loop with file locking
•    Normal Mode: Up to 30 min long files (no looping or file locking)
•    GPS: 10Hz GPS receiver with internal antenna
•    Power: 12v, 5m Power cable with Aux plug or optional 12/24v hard wiring solution
•    EIS: Electronic image stabilisation
•    G-Force: 3D G-force Sensor installed (variable sensitivity)
•    Internal Power: 2 x Super capacitors to ensure safe camera shutdown
•    Memory: SD XC compatible (up to 128GB)
•    Sensor: Omnivision OV4689 with super low light sensitivity with HDR
•    Lens: 6 element glass, f/2.0, wide angled 125 degree lens
•    Mounting: Standard RoadHawk adhesive mounting ¼” Camera thread for suction/clamps mounts
•    Compatibility: Windows 7 or above and OSX 10.9 or above
•    Adjustable Settings: Mic sensitivity, speaker volume, event sensitivity, contrast, brightness, saturation, metering

RoadHawk have a full range of accessories available for the HD-2, including suction mounts, remote event buttons, connectivity options for telematics devices, locking solutions, extended GPS antennas and easy fit hard wiring kits

Download the HD-2 Spec Sheet PDF

Downloads:
RoadHawk camera comparison chart - DOWNLOAD

•    1 x RoadHawk HD-2 1080p Dash Cam
•    1 x 16GB Class 10 SD Card
•    1 x Accessory socket power cable
•    1 x Short windscreen mount
•    1 x Adjustable windscreen mount (For  steep screens)
•    1 x Long arm windscreen mount (For vertical screens)
•    1 x User manual
•    1 x Card reader
•    5 x Windscreen clips

Dashcam Firmware Update

Update instructions:

*The firmware update can be downloaded directly from the viewer program

1. Download and save the firmware file into your SD card root folder
2. Insert the SD card and power on the dashcam
3. The dashcam will detect the new firmware and update itself

 

Email:  support@astak.com 

Call: 1-866-368-8788

Business Hour:

Mon - Fri 9AM-6PM Pacific Standard Time (PST)